COD. 6215008BR PAIR OF MALOSSI BRAKE PADS Front YAMAHA AEROX 50 2T LC euro 0-1 MHR Front -
Malossi is proud to offer its customers a complete range of brake pads suitable for all uses, from road to racing. Our products are the result of a careful research and development phase that culminates in exceeding the standards required for approval by a prestigious body such as DEKRA.
SPORT
|
BRAKE PADS SPORT |
|
Malossi Brake Pads SPORT are brake pads made with organic friction material, completely free of asbestos.
This product line represents excellence in the replacement of original equipment pads.
The compound of these pads guarantees good durability, without penalizing braking efficiency.
With BRAKE PADS SPORT, excellent performance is combined with high braking modulation, allowing you to stop your vehicle with great safety and control in all conditions.
|
MHR SYNT
|
BRAKE PADS MHR SYNT |
|
Pads with sintered friction material have the highest friction coefficient ever and therefore guarantee shorter stopping distances with breathtaking decelerations. Their peculiarity is the ability to maintain constant performance regardless of temperature and weather conditions.
The friction material is obtained through the sintering of metal powders and other copper-based elements, resulting in a compound that enhances braking power without penalizing durability.
|
MHR
|
BRAKE PADS MHR
|
|
The friction material of BRAKE PADS MHR pads is made with completely organic and absolutely asbestos-free fibers. The compound has been specifically designed for racing use and minimizes the fading effect.
The MHR BRAKE PADS reach the point of maximum performance in the shortest possible time, while maintaining perfect consistency of performance and exemplary braking modulation from the first to the last lap of a race, an essential condition for use on the track.
The compound of these pads contains elements that prevent the friction material from burning when subjected to strong stresses, such as those created during a competition!
|
APPROVAL
Malossi is committed every day to improving the quality, performance and safety of its products and it is in this perspective that the proposal of a range of APPROVED brake pads is placed.
It is very important to us that our customers are certain that MALOSSI PADS and MALOSSI SYNT PADS comply with the strict standards imposed by ECE R90 approval and can be used on road vehicles throughout Europe and in many countries around the world.
HOW ARE MALOSSI PADS APPROVED?
To obtain this certification, MALOSSI PADS must pass some road tests performed on the vehicle for which the pads are intended. During these tests, efficiency is verified through a series of braking tests both "cold" and under stress, to evaluate the resistance of the pad and its braking capacity at different speeds. Sensitivity tests are also planned to evaluate what pressure variation is needed to obtain the same deceleration value at three different speeds. In addition to road tests, the material with which the pads are made is also subjected to laboratory tests such as resistance to compression and shear.
Malossi has obtained the E/ECE/324-E/ECE/TRANS/505 Regulation No. 90 certification thanks to the collaboration of Dekra, a true giant in the certification sector. The vehicle tests were carried out by Dekra inspectors at the Balocco Proving Ground and at the Dekra Test Centre in Cinisello Balsamo, and they exceeded the requirements of the ECE R90 regulation by a wide margin!
THE ENTIRE RANGE OF MALOSSI PADS IS DESIGNED AND MADE IN ITALY
COMPATIBILITY
APRILIA SR DITECH 50 2T LC (APRILIA) Front - for vehicles MADE 2000 -->
APRILIA LEONARDO 125 4T LC Front - for vehicles PRODUCED 1995 --> 1996
APRILIA SR NETSCAPER 50 2T LC (MINARELLI) Front - for vehicles PRODUCED 1993 --> 1996
APRILIA SR RACING 50 2T LC (MINARELLI) Front - for vehicles PRODUCED 1993 --> 1996
APRILIA SR (carb.) 50 2T LC 2004-> (PIAGGIO) Front
APRILIA SR 50 2T <-1993 Front - for vehicles MADE 1993
APRILIA SR R 50 2T LC euro 4 2018-> (PIAGGIO CA81M) Front
APRILIA SR R FACTORY 50 2T LC (PIAGGIO C361M) Front
APRILIA SR DITECH GP1 50 2T LC (PIAGGIO C361M) Front
APRILIA SR REPLICA 50 2T LC <-1999 Front - for vehicles PRODUCED 1993 -->
APRILIA SR R (carb.) 50 2T LC (PIAGGIO) Front
APRILIA SR Street 50 2T LC euro 2 Front
APRILIA SR STEALTH 50 2T LC (MINARELLI) Front - for vehicles PRODUCED 1993 --> 1996
APRILIA SR WWW 50 2T Front - for vehicles MADE 1993 --> 1996
MBK BOOSTER SPIRIT 50 2T euro 0-1 Front - for vehicles PRODUCED 1996 -->
MBK EVOLIS 50 2T Front - for vehicles MADE 1992 -->
MBK FIZZ 50 2T Front - for vehicles PRODUCED 1994 -->
MBK FORTE 50 2T Front - for vehicles PRODUCED 1995 -->
MBK NITRO 50 2T LC Front - for vehicles PRODUCED 1997 -->
MBK OVETTO 50 2T Front - for vehicles PRODUCED 1997 -->
PIAGGIO NRG Power 50 2T LC euro 4 2018->2020 (CA71M) Front
SUZUKI AP 50 2T Front - for vehicles MADE 1995 -->
YAMAHA AEROX 100 2T Front - for vehicles MADE 2000 -->
YAMAHA AEROX 50 2T LC euro 0-1 Front - for vehicles PRODUCED 1997 -->
YAMAHA AEROX 50 2T LC euro 2 Front
YAMAHA JOG R 50 2T Front - for vehicles PRODUCED 1993 -->
YAMAHA JOG Z 50 2T Front - for vehicles PRODUCED 1993 -->
YAMAHA NEO'S 100 2T Front - for vehicles MADE 2000 -->
YAMAHA NEO'S 50 2T Front - for vehicles PRODUCED 1997 -->
YAMAHA ZEST 50 2T Front - for vehicles MADE 1992
The Product may be reserved exclusively for competitions in places specially designated for such purposes according to the provisions of the competent sports authorities. We decline all responsibility for improper use.
FOR INFORMATION DO NOT HESITATE TO CONTACT US
Billaricambi staff